Page 25 - ABB_Surface-mounted_junction_boxes

25

Strain-relief for 3 cables, Ø 6 – 17 mm
Junction boxes AP9, AP10 and AP45 can be furnished with the strain-relief AS9.10 for 3 cables.
AP9: 3x 6 - 17 mm. AP10: 1x 6 - 19 mm (middle) and 2x 6 - 12mm (sides). AP45: 3x 6 - 17 mm. It can also be used with 3
flexible connecting cables H03VVH2-F 2x0,75. Strain relief is done with help of cable tie (not included). Two strain-
reliefs can be used in opposite sides the box with AP9 and AP10, or crosswise in AP9 boxes.

Type EAN Description Package
AS9.10 6438199005355 Strain-relief for 3 cables, Ø6–17 mm 10/100

AP-Holder splicing connector for AP9 & AP10
Splicing connectors holder made from recycled plastic is used to fasten connectors to AP9 and AP10 surface mounted
junction boxes. When using AS221.4 splicing connectors are firmly secured to the box, enabling faster, easier and safer
installation.

Type EAN Description Package
AS221.4 6438199038513 AP-holder 10/250/4500

Junction box 60 x 60 mm, IP20
The box is equipped with an insulated 5-way connector. The maximum wire size per connector is 4 x 2.5 mm² or
6 x 1.5 mm². The box has 6 knock-outs at the side and 2 in the bottom. Made of halogen-free material (IEC/61249-2-21).

Type EAN Description Package
AP6 6410016020062 Junction box IP20, white, 60 x 60 mm 10/100
AP6.2 6418677308055 Junction box, grey, 60 x 60 mm, incl. connector 10/100

Junction box 59 x 79 mm, IP20
The AP12 junction box has two 3-pole insulated 6 mm² connectors. The base plate offers a choice of eight different
connection points for the connectors. There are three knock-outs in the bottom of the box. The cover has knock-outs in
the corners and on the long sides of the cover. The maximum wire capacity per connector is 8 x 1.5 mm² or 5 x 2.5 mm².

Type EAN Description Package
AP12 6410016020123 Junction box IP20, 59 x 79 mm, 10/50
AP12.1 6418677301452 Junction box IP20, 59 x 79 mm, without connectors 10/50

Surface-mounted junction box 75 x 75 mm, IP65
The AP75 junction box (2.5 mm², 400 V, IP65) is equipped with fixed, two-component membrane lid cable entries, 10
in the sides and three on the bottom. It has a stiff frame. Suitable for cables up to Ø18. The locks box by snapping
and can be opened by inserting a screwdriver into the opening slots. Pull-out brackets make it possible to mount it
to a conductive base. The box can also be sealed. Mounting temperature -15... +60 °C. Made of halogen-free material
(IEC/61249-2-21).

Type EAN Description Package
AP75 6410016125200 Surface-mounted junction box, white 75 x 75 mm 5/50
Accessory
AS12.3 6410016125217 Strain relief, Ø8 - 12, for junction box AP75 10/250