Page 15 - dantonit-brochure-naturprodukter-a4-en-lr

DantoCon Thermal R05S and R06S

DantoCon Thermal R05S and R06S are specially freshwater before use. DantoCon Thermal R06S is
developed heat-conducting materials for temperature resistant to sulfate and can therefore be used in sulfate-
control of electrical cables that have been run in containing soils. Two weeks after injection, the material
underground pipelines. Both products are delivered will have achieved its permanent firm consistency, which
in powder form and simply need to be mixed with allows the cable to be removed as needed at a later date.

DantoCon Thermal R05S 38
0.47
Specific properties 2.13
Concentration (% water) 1.62
Resistivity after 1 week (mK/W) ASTM.D5334-14 <1
Conductivity after 1 week (W/mK) ASTM.D5334-14
Density of the ready mixture (kg/l) Tolerance: (1.60 - 1.64) ≤ 0.60
Water residue after 24 hours (%) ≥ 1.67
Measured values in the mixed condition
Resistivity (mK/W) ASTM.D5334-14 616
Conductivity (W/mK) ASTM.D5334-14 1,004
Mixing ratio per 1 m3 ready mixture
Water (l) 600
DantoCon Thermal R05S (kg) 1,000
Mixing ratio per 1,000 kg dry material
Water (l)
DantoCon Thermal R05S (kg)

DantoCon Thermal R06S 43
Specific properties 0.63
Concentration (% water) 1.59
Resistivity after 1 week (mK/W) ASTM.D5334-14 1.55
Conductivity after 1 week (W/mK) ASTM.D5334-14 <1
Density of the ready mixture (kg/l) Tolerance: (1.54 - 1.58)
Water residue after 24 hours (%) ≤ 0.72
Measured values in the mixed condition ≥ 1.39
Resistivity (mK/W) ASTM.D5334-14
Conductivity (W/mK) ASTM.D5334-14 677
Mixing ratio per 1 m3 ready mixture 889
Water (l)
DantoCon Thermal R06S (kg) 750
Mixing ratio per 1,000 kg dry material 1,000
Water (l)
DantoCon Thermal R06S (kg)